Click image to view full size image
Description:
cnc rotary worktable1, Customer First
2, sincere cooperation
3, Mutually beneficial
4, Joint development, cnc rotary worktable
cnc rotary worktable
1, Customer First
2, sincere cooperation
3, Mutually beneficial
4, Joint development, cnc rotary worktable
Productinfo
| Model | WGNC-320N | ||
| Worktable diameter | Ø320mm | ||
| Center height ( Vertical ) | 210mm | ||
| Center bore diameter | Ø40 H 7 | ||
| T - slot size | 14 H7 | ||
| Guide block size | 18 H7 | ||
| Number of worm Gear teeth | 72 | ||
| Cunulative indexing accuracy | 15" | ||
| Repeatability | 4 " | ||
| Clamp torque & Clamp method | 85kg-m(Hydraulic 5kg/cm2) | ||
| Load capacity | Vertical | 150kg | |
| Tail-stock used | 350 kg | ||
| Allowable inertia force | 38.5kg - cm - sec2 | ||
| Allowable turntable torque | 85kg - m | ||
| Net Weight ( motor exclude ) | 162kg | ||
| Servo motor (model excluded ) | FANUC | MITSUBISHI | |
| β iS22, α iF12 | HA 100/HF 204 | ||
| Speed reduction ratia | 1/180 | ||
| Minimum input increment | 0.001º | ||
| Table roation speed | 11.1r.p.m. | ||
cnc rotary worktable cnc rotary worktable cnc rotary worktablecnc rotary worktable
Dear, we could supply you the boring and millingmachine/machining center with different configuration according yrprocessing requirement .Any request pls direct contactBing Wang, and pls browsethe site as flws for more products and contact details:
http://cncmachine.jimdo.com and www.hzdtsk.com/en
Pls check it and contact there, u will get a quicklyreponse.Thank you for yr kindly understanding.
2012 cnc rotary worktable WGNC-320N
